Table of Contents
Advertisement
GETTING
STARTED
5.
Plug the AC adapter into a standard 120V AC wall outlet.
6.
Plug the modular cord into the TEL LINE jack.
7.
Route the modular cord through the hole of the wall mount bracket as shown.
8.
Plug the modular cord into the telephone wall jack.
9.
Align the mounting slots on the base with the mounting posts on the wall. Then push
in and down until the phone is firmly seated.
Notes:
•
DO NOT use an AC outlet controlled by a wall switch.
•
To mount the phone directly on the wall, insert two #10 screws (minimum
length of 1 3/8 inches (34.9 mm), not supplied) into the wall, 3 15/16 inches
(100 mm) apart; leave the screw heads 1/8 inch (3.175 mm) away from the
wall to allow room for mounting the phone. Be sure the wall is capable of
supporting the weight of the phone, and use the proper type of anchoring
device for the wall material. No need to route the telephone cord through the
hole of the wall mount bracket when mounting directly on the wall.
UC590EH.indd E11
UC590EH.indd E11
AC outlet
AC outlet
E11
Route the cord.
Route the cord.
Wall plate
Wall plate
AC adapter (supplied)
AC adapter (supplied)
8/19/2008 11:39:00 AM
8/19/2008 11:39:00 AM
Advertisement
Table of Contents
