Finding A Lost Handset - Sanyo CAS-D6325 Instruction Manual

USING
YOUR PHONE
Adjusting the Speaker Volume
Handset Speakerphone: You can choose from six volume levels for the handset speakerphone. To adjust the speaker
volume while on a speakerphone call, press
Base Speaker: You can choose from ten volume levels for the base speaker. To adjust the speaker volume while call
screening or playing messages, press VOLUME + (to make it louder) or VOLUME - (to make it softer).
Adjusting the Audio Tone
If you aren't satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call.
Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is recommended
for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone.
To adjust the audio tone:
1.
While on a call, press MENU/SELECT.
2.
Move the cursor to select AUDIO TONE, and then press MENU/SELECT.
3.
Move the cursor to select desired option (HIGH TONE, NATURAL TONE, or LOW TONE), and then press MENU/SELECT.
Selected option appears in the display for two seconds, and then the display returns to normal.

Finding a Lost Handset

To locate a misplaced handset, press FIND HS on the base when the phone is in standby. The handsets registered to the
paging base will beep for one minute, and PAGING appears on the handset display. To cancel paging, press FIND HS again
or any key on the found handset.
Note:
• Handsets that are not currently registered to this base will not be paged.
UC590EH.indd E26 UC590EH.indd E26
(to make it louder) or (to make it softer).
E26
8/19/2008 11:39:06 AM 8/19/2008 11:39:06 AM