Sanyo DSR-2004 Instruction Manual page 17

Pre-operation preparation
3
Press the control button (~) twice and select the
SYSTEM, press the ENTER button.
The SYSTEM settings screen is displayed.
DVR ID
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
NETWORK PASSWORD
DATE FORMAT
CLOCK SET
PTZ CONTROL
LANGUAGE
REMOTE CONTROLLER ID
D.S.T./SUMMER TIME
4
Select DATE FORMAT using the control button
({|) and select the date display format using the
control button (}~).
• YYYY/MM/DD
(Example: 2006/12/15)
• MM/DD/YYYY
• DD/MM/YYYY
5
Select CLOCK SET using the control button ({|)
and press the ENTER button.
The CLOCK SET screen is displayed.
6
Select the date/time to be changed using the
control button (}~), select a value using the
control button ({|), repeat to set the date/time and
press the ENTER button.
The UPDATE DATE&TIME screen is displayed.
CLOCK SET
2006/12/15
UPDATE DATE&TIME
CANCEL
The time on this CLOCK SET screen has not been
calculated considering summer time.
7
Select CONFIRM using the control button (}~) and
press the ENTER button.
The screen switches to the "INITIALIZING..." screen.
The live videos as well as the set date/time are
displayed on the monitor.
SYSTEM
DVR
YYYY/MM/DD
ENGLISH
0
OFF
• YYYY-MM-DD
(Example: 2006-12-15)
• MM-DD-YYYY
• DD-MM-YYYY
10:20:30
CONFIRM
b In the event that the clock is early
Reset the clock using the CLOCK SET, select "CONFIRM"
under "UPDATE DATE&TIME". The TIME MISMATCH screen
is displayed, select "YES".
• YES:
The videos between "SYSTEM TIME" and "HDD LAST
TIME" are lost.
• GO TEST MODE:
Do not select. (Maintenance mode)
UPDATE DATE&TIME
CANCEL
INITIALIZING...
CH1 C
CH3
CH3 C
TIME MISMATCH.
WILL YOU ERASE INDEX?
IF YES, SOME DATA WILL BE ERASED FROM HDD.
CH1 R
IF THE DATA IS TO BE KEPT, SELECT GO TEST MODE.
SYSTEM TIME: 2006-09-09 19:56:36
HDD LAST TIME: 2006-09-09 20:05:45
GO TEST MODE
CH3
CONFIRM
CH2 CH2 C
CH4
CH4 C
CH2
YES
CH4
8