Main Screen Structure And Function Of Each Part - Sanyo DSR-2004 Instruction Manual

Main screen structure and function of each part

When connected to this unit, the live video of the camera is displayed on the main screen.
3
1
Video display area
Displays live video or playback video.
<Screen display method>
Can be switched using the operation button on the screen.
(P43)
• Single-screen
• Quad-screen
• Sequence (camera switch) display
• Full-screen display
<Camera information>
The following camera information is displayed on each
camera video.
1 (Top left):
• Camera channel (CH 1-4)
• Camera designation
Set in the camera designation settings (site) screen
in the set up menu. (P51)
(When no camera is connected to the channel, the
message "No Camera" is displayed.)
2 (Top right):
M: BY MOTION recording in progress (P13)
S: BY EXT. SENSOR recording in progress (P14)
3 (Bottom right):
R: Recording, such as real time recording, in progress.
(P12)
4 (Bottom left):
A: Alarm output in progress (P43)
1 2
1
4
4
2
The following information is displayed.
1
2
3
3
The view operation buttons are arranged on the panel.
4
The operation history is displayed as a list.
Displayed items: Type, Site, Event, Date/Time
Memo: Click [SEARCH] on the operation panel to switch the
3
2
3
(The example shown is a quad-screen display.)
Information display area
Shows the used capacity of the hard disk of this unit
Communication bit rate and frame rate
To display, set in the set up menu in the general setting
screen. (P50)
Date and time information
For live video: Current date and time
For playback video: Recorded date and time
Operation panel (P43)
Log window
screen to search mode. One part of the operation
panel display and one part of the log window display
change. (P47)
2
1
42