Table of Contents
Advertisement
6
SEARCHING FOR RECORDED IMAGES
9
Press the [ ] button.
The motion sensor setting screen is displayed.
Motion sensors should be set at locations where
movement is to be detected and viewed.
See "Setting the motion sensor" ( P. 67) for details.
Setting
example
10
Move the cursor to "EXIT" and press the
[
] or [
] button.
The display returns to the <MOTION DETECTION
SEARCH> screen.
11
Press the [
"PREVIEW".
12
Press the [ ] button.
Each time the [ ] button is pressed, a different motion
sensor screen will be displayed on the preview screen.
If "NOT FOUND!" is displayed
No motion sensors have been set. A motion sensor
must be set to allow a screen to be displayed.
English
] or [
] button to select
Viewing a motion sensor on-screen
1
Press the [
"VIEW".
2
Press the [ ] button.
Normal playback will be started for the specified image.
Using this unit in combination with a multiplexer
By specifying the camera number (or channel) and
performing "MOTION DETECTION SEARCH",
playback can be carried out for only the specified
camera number.
In such a case, the multiplexer title information, date
information, and/or time information may partially
disappear.
To playback an image from a different camera, stop
playback and then repeat the setting process from the
beginning.
35
] or [
] button to select
Advertisement
Table of Contents
