Table of Contents
Advertisement
e00_VDH_M814.book Page 42 Thursday, October 28, 2004 9:59 AM
6
Press the [
] or [
sensor operation position, then press
the [
] or [
selection (you can set up to 20
positions).
You can set sensor operation positions at any
screen position.
Moving the cursor
Each time you press the [
moves from left to right in the top row. After the
cursor has reached the end of the row, it moves from
left to right in the row below.
You can press the [
the opposite direction.
Holding down the [
cursor as follows:
LEVEL
Setting sensor operation positions
Pressing the [
] or [
currently selected position (displays
the [
] or [
] button again disables the setting
(displays –).
Setting
example
Operation position setting example
If you set an area near the center of the screen, the
sensor operates and recording starts when a moving
subject near the center of the screen is detected.
] button to select a
] button to set the
] button, the cursor
] button to move the cursor in
] or [
] button moves the
Set sensor position
] button once enables the
). Pressing
7
When you have finished making the
settings, press the [EXIT/OSD] button.
The display returns to the normal screen.
To activate alarm recording when the motion sensor
detects movement, display the <RECORDER
MENU>, and set the "ALARM TRIGGER" in "ALARM
REC MODE SET" to a setting other than "ALARM."
( P.46)
SCREEN SET MENU
42
Advertisement
Table of Contents
