Table of Contents
Advertisement
e00_VDH_M814.book Page 60 Thursday, October 28, 2004 9:59 AM
2
Select "7. RS-485/NETWORK SET", and
press the [
] button.
The <NETWORK SET> screen is displayed.
(1)
(2)
Settings
Item
(1)
IP ADDRESS
Displays the IP address that has been set.
ADVANCED
Set whether to set IP address on digital video
(2)
SETTING
recorder or on PC.
3
Press the [
] or [
"ADVANCED SETTING" and press the
[
] button.
The <NETWORK SET-ADVANCED> screen
appears.
The cursor moves to "ADDRESS SET".
4
Press the [
] button, then press the
[
] or [
] button to select "MANUAL".
Settings (
Description
] button to select
RS-485/NETWORK SET
indicates default setting.)
Setting
Description
When either the VA-SW814 Ver.2 or VA-SW81LITE
Ver.2 remote control software is used, the digital video
AUTO
recorder's [STILL] button can be pressed to have the IP
address set automatically.
The "DVR NAME", "IP ADDRESS" and "SUB NET
MANUAL
MASK" are set on the digital video recorder.
5
Set "DVR NAME", "IP ADDRESS", and
"SUB NET MASK" using the [
and [
] buttons.
6
Press the [EXIT/OSD] button.
The display returns to the normal screen.
When a new IP address is set using the digital video
recorder, it will become valid upon leaving the
<RS-485/NETWORK/REMOTE SET> screen.
When connecting the digital video recorder to a
network, check the IP address with the network
administrator.
The set IP address is displayed in the <RS-485/
NETWORK/REMOTE SET> screen.
], [
],
60
Advertisement
Table of Contents
