Process Records - ABB CalMaster2 Instruction Manual

Field and Software Tools
CalMaster2 and CheckMaster

5.4.1 Process Records

Process Records is used to extract the verifications from a connected CalMaster2. The Process
Records dialog box appears when selected from the CalMaster2 Wizard – see Section 5.4,
page 27.
To open the process records dialog box, click the
'Process Records' and click 'Next'.
This dialog box displays a list of the tasks required to download verifications from a CalMaster2:
Icons
Start processing records.
Cancel processing records.
Reset the CalMaster2. Note. All Verifications are erased.
To process records:
1. Ensure the CalMaster2 is switched on.
2. On the right-hand side, click the
Note. This process could take a few minutes to complete. A progress bar appears at
the bottom of the dialog box. As the download process proceeds, each task is
highlighted in turn. To cancel the process, click the
3. At the Reset CalMaster2 task, a prompt appears asking whether the CalMaster2 is to be
reset. Select either 'Yes' to delete all verifications held in the CalMaster2 or 'No' to leave the
verifications in place.
Note. The CalMaster2 can hold the test results of up to 100 flow meters.
4. Once the download process is complete click 'Next'. The Review Records dialog box
appears – see Section 5.4.2, page 29.
28
button to start the CalMaster2 wizard, select
button to start the download process.
5 CalMaster2 IRIS Software
button.
IM/VCM2 Issue 6