Io Connector Assembly Disassembly; Speaker & Front Key Disassembly; Figure 4-9. Removing Main Pcb; Figure 4-10. Removing Io Connector Assembly - Motorola MINITOR VI Basic Service Manual

Disassembly/Reassembly Procedures: Pager Disassembly – Detailed

4.3.2.3 IO Connector Assembly Disassembly

1. Remove the Bracket IO (29) with Bumper IO (30) from the IO Connector Assembly
(25,26,27,28) (Figure 4-10.).
2. Remove the IO Connector Assembly from the Front Housing Assembly.
4.3.2.4 Speaker & Front Key Disassembly
1. Remove the (+) Machine Screw (18) holding the Speaker Bracket (17) with a screwdriver.
2. Remove the Speaker Bracket.
!
C a u t i o n
3. Remove the Speaker (15) and Speaker Bumper (16) from the Front Housing Assembly.
Screw

Figure 4-9. Removing Main PCB

Figure 4-10. Removing IO Connector Assembly

Be careful not to damage the spring terminals of the speaker
when removing the speaker bracket.
Main PCB Assembly
Latch
Flex
Bumper IO
Bracket IO
IO Connector Assembly
4-7