4-10
4.4.1.5 Switch PCB Assembly Reasassembly
1.
Insert the Flex into the respective connector on the Main PCB Assembly (35).
2.
Push both latches into the connector.
3.
Apply the Screw fastener (3bond, TB1410B) around the thread of both Channel/ Volume
switches (Figure 4-16.).
4.
Tighten the Nut for Ch/Vol (24) holding the Channel/ Volume switches to the housing with
Crab Eye Nut Tool torque to 4.0 kgf~5.0
5.
Assemble the Volume Knob Kit (38, 39) and Channel Knob Kit (36, 37) (Figure 4-17.).
Disassembly/Reassembly Procedures: Pager Reassembly – Detailed
Screw
Figure 4-14. Main PCB Assembly
Figure 4-15. Assembling Switch PCB Assembly
Main PCB Assembly
Latch
Connector
Flex
Switch PCB Assembly
Flex
Latch
Main PCB Assembly
kgf.