4-12
Grease
2.
Assemble the Back Housing Assembly (11, 12, 13, 14) to the Front Housing Assembly. Use
screw kit RLN6520_. Do not reuse original screws or screw caps. The thread lock on the
screws is degraded after removing and the caps may have been damaged when removed.
!
C a u t i o n
3.
Tighten the (+) Machine Screw (31) with a TORX
4.
Assemble the Rubber Cap-Small (34), Rubber Cap_R (32) and Rubber Cap_L (33)
(Figure 4-19.).
Disassembly/Reassembly Procedures: Pager Reassembly – Detailed
Figure 4-18. Applying Grease
Be careful not to pinch the Battery Contact Sealing Rubber.
Grease
™
T6 screwdriver torque to 3.0 kgf~3.5 kgf.