Chopping Ice Cubes; Drink Immediately; Storage; Overheating Protection - Silvercrest SNM 700 A1 KAT Operating Instructions Manual

7. Remove the blender jug 5-7 from the
base unit 1 and turn it around.
8. Unscrew the blade attachment 8/9
and ensure that the liquid drips into the
blender jug 5-7.
9. Before using it again and if necessary,
rinse the blade attachment 8/9 briefly
under running water.
10. Disconnect the mains plug 4 from the
wall socket.
11. Clean the device as soon as possible
after use.

6.4 Chopping ice cubes

For chopping ice cubes the device should be
switched on and off in a pulsating manner.
• Switch the device on and off 4x for up
to 10 seconds each time.

6.5 Drink immediately

• Figure C: in order to drink the fresh
smoothie directly from the blender
jug 5 - 7, screw a To-Go lid or the
keep-fresh lid 10 on the filled blender
jug 5-7. If need open the drinking clo-
sure 12 and drink from the opening for
drinking 11. After you have closed the
drinking closure 12 the opening for
drinking 11 and blender jug 5-7 are
tightly closed. You can also enjoy your
smoothie "to go" when you are out
and about.

6.6 Storage

• Figure C: smoothies are intended to be
consumed as soon as possible. Then, it
is best to put the smoothie in the refrig-
erator. Use the keep-fresh lid 10 for this
purpose.

6.7 Overheating protection

The device has an overheating protection
system. If the device has been in operation
20 GB
for too long thus causing the device to be-
come too hot, it automatically switches off.
• In this case, pull out the mains plug and
allow the device to cool.
• You may then put the device back into
operation.

7. Cleaning

Clean the device prior to its first use!
DANGER! Risk of electric
shock!
Pull out the mains plug 4 from the wall
socket before cleaning the Nutrition
Mixer.
The base unit 1 and the power cable
with the mains plug 4 must not be im-
mersed in water or other liquids.
DANGER! Risk of injury from
cutting!
When washing manually, the water
should be sufficiently clear for you to
see the blade attachment 8/9 easily.
WARNING! Risk of material damage!
Do not use any astringent or abrasive
cleaning agents.
After every use
• Clean the device and all individual
parts used after each use and remove
all food residues.
• Prior to cleaning, all parts must be sepa-
rated from one another (e.g. remove To-
Go lid or keep-fresh lid 10 from blender
jug 5-7).
Base unit
Wipe off the base unit 1 and the power ca-
ble 4, using a lightly moistened cloth. Dry
with a dry cloth.
Manual cleaning
1. The accessories (blade attachments
8/9, blender jugs 5-7, and To-Go lids