Philips CM-150 CA Manual page 17

Firmware version number
You can find more information on
E
Firmware Updater at ww.colorkinetics.
w
com/support/downloads/firmware/
Updating CM-150 CA Firmware
The CM-150 CA firmware image is periodically updated to improve system
performance and functionality. To maximize system performance, make sure your
CM-150 CA devices are running the most recent version of the firmware. We
recommend that you confirm that your CM-150 CA devices have the most recent
version of the firmware before installing them in your lighting network.
Determine CM-150 CA Firmware Version
1. You can determine the firmware version that your CM-150 CA devices are
running with a computer and QuickPlay Pro:
In Ethernet installations, connect a computer to the lighting network and run
QuickPlay Pro. QuickPlay Pro automatically discovers all connected CM-150
CA devices. Select a device from the Controllers list.
2. If necessary, select a CM-150 CA device from the Controllers list.
The firmware version for the selected CM-150 CA device appears at the top of
the QuickPlay Pro window, on the right.
Download CM-150 CA Firmware
If a more recent version of the CM-150 CA firmware is available, download the
firmware file (.hex extension):
1. Visit the Firmware Updater page at www.colorkinetics.com/support/downloads/
firmware/ to check for the latest firmware version.
2. If a newer firmware image is available, click the link on the Firmware Updater page
to download the firmware file to an accessible location on your computer.
Download CK Firmware Updater
To update the firmware image on a CM-150 CA device, you must download and
install the CK Firmware Updater application on your computer.
1. Visit the Firmware Updater page at www.colorkinetics.com/support/downloads/
firmware/
2. Download the CK Firmware Updater installer.
3. Decompress the file to an accessible location on your computer and open it.
4. Run the installer, and follow the on-screen instructions.
Running a CM-150 CA Firmware Update (Ethernet network)
1. Connect a computer to the lighting network, and run CK Firmware Updater.
2. From the Interface Select list, select Ethernet Controllers.
3. From Device Select list, select CM-150 CA.
4. Click File Select, navigate to the folder to which you downloaded the firmware file
(.hex extension), and click Open.
17
CM-150 CA Product Guide