Table of Contents
Advertisement
Screen Displays in Touch Panel / Mouse Mode
The screens that appear in touch panel / mouse mode differ slightly from those that appear in standard mode.
This section describes the main differences in the screens and buttons that appear.
[MENU] Screen
a [Patient Info.]
Displays the patient ID, patient name, gender, and
date of birth.
b [New Folder]
Resets the patient information.
[Close Folder]
Use this to end recording, and display the [End
Recording] screen.
c [Recording Preparation] tab
Enter patient information and configure the storage
destination for recorded data before starting to record.
For details on each setting, see "Recording
Preparation" (page 46).
Tip
When entering the date of birth in the touch panel
monitor screen, the year is entered via the on-screen
keyboard.
d [Recording] tab
Allows you to perform recording and playback
controls for Ch2.
For details on each setting, see "Recording
Preparation" (page 46).
Tips
• Ch1 playback cannot be performed during Ch2
recording or playback.
• Ch2 recording or playback cannot be performed
during Ch1 playback.
• The items in the [Recording] tab will be grayed out
during [Ch1 2K Rec] mode.
e [Change Settings] tab
Allows you to change the image quality and video
input.
For details on each setting, see "Configuring Input
Signal Settings" (page 34), "Configuring Image
Quality Settings" (page 34), and "Configuring
Recording Settings" (page 35).
f [Link On] (Ch1/Ch2 link)
Use this to enable Ch1/Ch2 simultaneous recording.
This button is disabled when recording for Ch1 or
Ch2 is in progress.
On (green): Recording and playback controls for
Ch1 and Ch2 are linked.
Off (gray): Ch1 and Ch 2 are not linked.
82
Advertisement
Table of Contents
