Automatic Switch-Off; Troubleshooting - Silvercrest SKBL 56 A1 Manual

If you connect a 3.5 mm (0 .14") jack cable
Bluetooth
® operation, the speaker will automatically switch to playback
from the connected device.

Automatic switch-off

If the 3 .5-mm (0 .14") jack socket
Bluetooth
® , the speakers automatically switch off after about 10 minutes .
The operating/charging LED
Any existing Bluetooth
® connection will be terminated .
♦ Press and hold the
back on .
The automatic turn-off function does not work while the speakers are charging.
■ 12
│ US-EN
IB_282774_Bluetooth_SKBL56A1_LB9.indb 12
to one of the speakers during
is not in use or their is no playback via
will go out and you will hear a beep .
button for about 4 seconds to turn a speaker

Troubleshooting

If you cannot pair the speakers to a compatible Bluetooth
proceed as follows:
Make sure that the Bluetooth
♦
When a device is connected via a 3 .5-mm (0 .14") jack cable, the
Bluetooth
® function is deactivated .
♦ Ensure that the speaker is turned on .
♦ If you use several music devices, ensure that any previous connection is
disconnected (see section Function of the buttons for music playback) .
There may be a previously paired device within range .
Make sure that the speakers are no more than 32 ft from the Bluetooth
♦
device and each other . Make sure that there are no barriers or electronic
devices placed between them .
® music device,
® function is activated on the music device .
SKBL 56 A1
®
16.01.17 11:28