Silvercrest SKBL 56 A1 Manual page 8

♦ Press and hold the
on and activate the Bluetooth
operating/charging LED
Make sure that the speakers are no more than 32 ft from the Bluetooth
device and each other. Make sure that there are no barriers or electronic
devices placed between them.
Select SKBL 56 A1 from the list of found devices on your Bluetooth
♦
device to pair the two devices . You will hear a short beep when the connec-
tion has been established successfully . The operating/charging LED
flash twice in 3 second intervals .
♦ If you want to operate the second speaker in mono mode with a different
Bluetooth
® playback device, carry out the process described above with
the second speaker . Make sure you do not turn on the second speaker until
you have paired the first speaker with a Bluetooth
You can now use the speaker wirelessly to listen to your favourite tunes .
■ 8
│ US-EN
IB_282774_Bluetooth_SKBL56A1_LB9.indb 8
button for about 2 seconds to turn a speaker
function . You will hear a beep and the
®
will flash orange und blue .
® playback device .
The next time you turn on the speakers, they will connect automatically to the
most recently connected Bluetooth
does not automatically reconnect, you will have to re-establish the connection
manually. A detailed description of how to do this can be found in the oper-
®
ating instructions for your Bluetooth
If you want to connect the speaker to another Bluetooth
first unpair the current Bluetooth
®
button and the
2 seconds until you hear a beep. Alternatively, you can terminate the connec-
will
tion on your Bluetooth
®
device. If your Bluetooth
®
® device.
® device, you must
® device. To do this, hold down the
button ( ) of the affected speaker for about
device. In this case, you will also hear a beep.
® device
SKBL 56 A1
16.01.17 11:27