Timer And Sleep Operation; Setting The Timer - Sharp DX-AT50 Operation Manual

Timer and sleep operation

SD-AT50
DX-AT50
ENGLISH
The system turns on and plays the desired source (DVD, CD, MP3 disc, tuner) at the
preset time.
[Front]

" Setting the timer

Before setting timer:
1 Set the AV control unit on time (page 24).
If it is not on time, you cannot use the timer function.
2 Prepare for playback and set the TV to the desired channel.
E-43
1
Turn the power on and press the TIMER but-
ton.
Set the AV control unit on time if "TIMER STANDBY"
does not appear.
2
Within 10 seconds, press the
select "TIMER SET", and press the ENTER
button.
3
Press the or button to adjust the hour and
then press the ENTER button.
4
Press the or button to adjust the minutes and then press the
ENTER button.
The start time is set and the finish time (1 hour later) will be displayed automati-
cally.
5
Set the time to finish as in steps 3 and 4 above.
6
Switch input with the or
and then press the ENTER button.
When you select the tuner, select a station
by pressing the or button, and then
press the ENTER button.
7
Adjust the volume with the or
ton.
Settings are displayed in order and the AV control unit will enter the timer stand-
by mode.
The timer setting indicator on the AV control unit will appear.
or button to
button,
DVD DIGITAL DVD ANALOG
TUNER AUX DIGITAL
VCR TV AUX ANALOG
button and press the ENTER but-