Preparations For Adjustments; Power Supply - Sony BVP-900 Series System Manual

4-2 Preparations for Adjustments

4-2-1 Power Supply

Turn on the system equipment to be used for
adjustments.
Refer to the Operation Manuals of the equipment.
To turn on the RCP-700-series panels
The power to the RCP-700-series Remote Control
Panel is supplied via the CCU-700A/700AP/550A/
550AP Camera Control Unit or the CNU-700/500
Camera Command Network Unit connected to the
CCU/CNU REMOTE (or REMOTE) connector.
When you turn on the CCU-700A/700AP or CNU-
700, the power is supplied to the RCP-series panel.
To turn on the camera
With the CAMERA POWER switch of the CCU-
700A/700AP set in its power-on position (CAMERA
POWER indicator lights), the power is supplied to the
camera and its viewfinder when you turn on the CCU-
700A/700AP.
Once the power is turned on with the CCU-700A/
700AP, you can turn off and on the camera and its
viewfinder from the MSU-700A/750 or the RCP-720/
721/730/731/740/741, whichever is in the panel active
status.
From the MSU-700A/750 or the RCP-740/741, you
can also turn off and on the viewfinder of the BVP-
900/900P.
For the panel active status, see "4-2-2 Setting the Control
Priority."
To turn on the camera and viewfinder from
the MSU-700A/750 or RCP-series panels
CAM PW button
VF PW button
MSU-700A
ALL CAM PW VF PW TEST1 TEST2 BARS
CAM PW button
MSU-750
VF PW button
ALL CAM PW VF PW TEST BARS
CAM PW button
RCP-740
RCP-741
LOCK
PARA MASTER SLAVE
RCP-720
RCP-721
RCP-730
LOCK
RCP-731
PARA MASTER SLAVE
When you press the lit CAM PW button, it starts
flashing and the power to the camera is turned off.
When you press the button again, the power to the
camera is turned on. The button promptly flashes and
then steadily lights when the camera becomes ready
for adjustments.
To turn off the viewfinder
Press the lit VF PW button. It goes dark and the power
supply to the viewfinder of the BVP-900/900P is
turned off.
When you press this button again, it lights and the
power comes on.
When the viewfinder on the BVP-900/900P is off,
pressing any of the RET1, RET2 or video signal select
buttons of the BVP-900/900P also turns on the
viewfinder.
AUTO SETUP
SKIN DTL LEVEL START/
CLOSE STANDARD BREAK WHITE BLACK
AUTO HUE
AUTO SETUP
AUTO
LEVEL START/
WHITE BLACK
CLOSE STANDARD
HUE BREAK
VF PW button
CAM PW VF PW TEST1 TEST2 BARS
CAM PW button
CAM PW TEST BARS
4-19
Chapter 4 Adjustments