General Control - Sharp CD G14000 Operation Manual

General control

CD-G14000
POWER
ON/ STAND-BY
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Display brightness control
To dim the display brightness, hold down the CLEAR/DIMMER
button on the remote control for 2 seconds or more.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
18
5
4
3
2
1
REMOTE
SENSOR
TIMER
POWER
ON/ STAND-BY
OPEN/
c CLOSE
CD
5
TAPE
(1 2)
4
TUNER
(BAND) 3
PRESET PRESET
2
AUDIO
IN
1
TUNING TUNING
VOL. VOL.
VOL.
—
Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase. When
it is turned counterclockwise, the volume
will decrease.
Remote control operation:
Press the VOLUME (+ or –) button to
increase or decrease the volume.
Bass control (X-BASS)
VOL.
When the power is first turned on, the unit
will enter the extra bass mode which
emphasizes the bass frequencies, and "X-
BASS" will appear. To cancel the extra
bass mode, press the X-BASS/DEMO
button.
Equalizer
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
CLASSIC
VOCAL
Note:
The extra bass mode is canceled when the EQUALIZER MODE
button is pressed.
0 .....
30 MAXIMUM
FLAT No equalization.
ROCK For rock music.
For classical music.
POPS For pop music.
Vocals are
enchanced.
For jazz.
JAZZ