Sharp CD G14000 Operation Manual page 34

Recording on a cassette tape (continued)
CD-G14000
POWER
ON/ STAND-BY
CD
34
5
4
3
2
1
REMOTE
SENSOR
TIMER
POWER
ON/ STAND-BY
OPEN/
c
CLOSE
CD
5
TAPE
(1 2)
4
TUNER
(BAND) 3
PRESET PRESET
2
AUDIO
IN
1
TUNING TUNING
VOL. VOL.
PLAYBACK (PLAY & S TOP) RECORD/PLAYBACK
PHONES AUDIO IN
Recording from a CD (or MP3 disc)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
OPEN/
c
CLOSE Wind past the leader of the tape, on which recording cannot be
performed.
4
Press the
5
Recording will be paused.
4
5
Press one of the
3
disc.
6
Within 5 seconds, press the
2
Recording is started from the selected CD. When the
1 playback of the last track is finished or the end of the tape is
reached, the CD and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after
the tape starts.
To stop recording:
Press the button.
The CD and tape will stop.
button.
1 - 5 buttons to select the desired
/ button to start recording.