NEC SL2100 Communication System
SLNet Overview
SLNet allows for networking between up to 50 SL2100 systems. Interconnected with VOIP, each phone system
becomes a node on the network that can communicate with any other phone system node. Systems can be
installed separately in the same building, or in remote locations connected via a suitable network.
SL2100 SLNet Channel Capacity
The capacity of SLNet channels is not limited by the quantity of IP or TDM ports installed.
The SL2100 supports up to 128 SLNet channels per network node (licenses required for each node).
Each SL2100 system within the SLNet Network must have sufficient SLNet channel licenses BE116748 installed
to provide the quantity of simultaneous voice calls required by the customer.
Each SL2100 system will also require sufficient VOIP resources to support the simultaneous calls.
SLNet Numbering Plan
The numbering plan must be unique for all nodes within the SLNet Network, each node must have a unique
extension number range, this is defined by the leading two digits unless you intend to use F-Route.
F-Route can be used to create a numbering plan that can use any number length to define the remote extension
numbers
Quick Install Guide – SL2100 SLNet rev1.0
6