NEC SL2100 Quick Install Manual page 33

Configure the SL2100
Use Centralized Voicemail Setup to configure each node.
At the system with Centralised InMail Voicemail installed
The configuration for the node that has the Centralised voicemail installed (Node 2) has a Department Group
assigned to the InMail ports, Refer to the InMail Quick Install Guide for details of setting up InMail.
The default is group 50.
Assign the name that will be
displayed when calling
voicemail
At the system(s) that do not have Centralised InMail Voicemail installed
The configuration for the nodes that does not have the Centralised voicemail installed (Nodes 1 & 3) does not
have a Department Group assigned to the InMail ports.
Define the Pilot number for Centralised voicemail and
Assign the name that will be
displayed when calling
voicemail
Quick Install Guide – SL2100 SLNet rev1.0
Assign the CVM Department
Enable NSL
protocol
The CVM Department group
Enable NSL
protocol
33
The local InMail Department
Group must be set to 0
The CVM Pilot number must be
defined in the numbering plan at
all nodes
group to the InMail ports
The local InMail Department
Group must be set to 0
The CVM Pilot number must be
defined in the numbering plan at
all nodes
must be set to 0