Philips PH11107-B Quick Installer's Manual page 26

Quick Installer Guide for Philips miniPCI 802.11a/b/g card
2. Controls on the Security Screen
Field
Disable Radio button
Leap radio button
User Name
Password
Confirm Password
Domain Name
802.1x radio button
Pre-Shared Keys
Default Key to Use
Alphanumeric or Hexadecimal Key
selection Radio Buttons
Key 1-4 edit controls
Key 1-4 length drop-lists
3. Interaction of Security Screen Controls
(1) Checking of 'Disable' radio button causes Security to be disabled and causes all other
screen controls to become disabled.
(2) Selecting 'Leap' radio button will enable controls related to Leap
(3) Selecting '802.1x' radio button causes 802.1x to be enabled and all other screen
controls to become disabled.
(4) Selecting 'Pre-Shared Keys' causes the section under static keys to be enabled and all
other controls disabled.
(5) Upon initial display of the Security screen(for Pre-Shared Keys), previously entered
key values will not be displayed. Each hex digit in these keys will be displayed as an
asterisk (*) character.
(6) Any modification to a key that is displayed as asterisk characters will cause the key
value to be erased. The new key must be entered in its entirety.
Figure 8 (User Information – LEAP)
Disables the encryption
Enables Leap security
Enter the leap user name
Enter leap password
Confirm the password for leap
Enter the leap domain
Enables 802.1x security
Enables static security
Used to identify which encryption key (Key1-
Key4) is to be used by default.
Allows user to select either of the two WEP Key
character Entry modes.
Used to enter up to four encryption keys for the
selected profile. Keys must contain only hex digits.
Each key's length is specified in the drop-list to its
right.
Used to select the length of the corresponding key
field. There are three choices: 10, 26, or 32 hex
digits.
- 26 -
Description