Philips PH11107-B Quick Installer's Manual page 27

Quick Installer Guide for Philips miniPCI 802.11a/b/g card
(7) Keys are restricted to contain only hex digits (0-9,A-F). The edit control for each key
will ignore entry of any non-hex digits. Digits may be upper or lower case.
(8) Each key value is restricted to the length specified by the list control to its right.
(9) If a key has been entered (or partially entered), and the user changes its length
selection, the key will be truncated if necessary. For example, if the user has entered
18 hex digits for Key 1, and then the user selects "10 Hex Digits" in its corresponding
length drop-list, then the last 8 digits of the key will be erased.
(10) If the user changes the key length selection for a key that is displayed as
asterisks, then the key value will be cleared, as described in (3) above.
(11) If the user changes the Key type between "Hexadecimal" and "Alphanumeric",
the Key values entered will be cleared.
(12) By default, the Hexadecimal Key Entry will be selected in Pre-Shared Keys
(13) Upon selection of 'Leap ' radio button, the user name and password files have to
be entered. And also the Confirm password field also to be entered.
(14) Upon selection of the 802.1x, the user doesn't have to enter anything in any
fileds. The operation will be handled internally.
4. Security Screen Input Validation
An error message is displayed, and the user is prevented from leaving the Security screen
(except via Cancel button), under the following conditions:
(1) Pre-Shared Keys is enabled and no encryption key has been specified.
(2) The "Default Key to Use" selection is a key that has not been entered.
(3) The length of one of the non-blank encryption keys does not match the corresponding
key length specified.
(4) Leap is enabled and no user name or password(confirm password also) is entered.
- 27 -