Table of Contents
Advertisement
(3)
Settings for Other Functions (FUNCTION SET.)
This is a menu to set various functions other than exposure.
FUNCTION SET.
SYNC SELECT
WHITE BALANCE
CHROMA
GAMMA
APERTURE
CABLE COMPEN.
MASKING
TITLE
RETURN
Figure 9-1 FUNCTION SET. menu
(3-1) SYNC SELECT
The synchronization can be set.
SYNC SELECT
SYNC MODE → AUTO
PHASE
→
RETURN
SYNC MODE
This selects the sync system.
AUTO: This operates with LineLock for the AC power and operates with Internal for DC
power.
INT:
This always operates using internal sync.
PHASE
This adjusts the vertical synch phase during LineLock operation.
Method for adjustment
1. Set "SYNC MODE" to "AUTO".
2. Move the cursor to "PHASE" and press the switch to display the "PHASE SHIFT" screen.
3. The vertical sync phase can be adjusted by moving the switch up or down from "PHASE SHI
FT" screen. Refer to figure 9-3.
Note) The phase of each camera is set to same phase at the factory. Usually, the phase doesn't
need readjustment.
-180
1H
PAL : 2.5H
NTSC : 3H
Figure 9-3 PHASE SHIFT
→
→ AUTO
→
→ CRT/PDP
→
-１
→ SHORT
→
→
END
END
Figure 9-2 SYNC SELECT menu
+180
0
-90
+90
V
SYNC
DOWN <=> UP
PHASE SHIFT
PHASE Value = 33
Adjustable Range
0 to 52 (NTSC)
0 to 62 (PAL)
En-16
Advertisement
Table of Contents
