Real Time Transmission
When you are sending a fax, the fax machine will scan originals into memory
before sending. Then, as soon as the phone line is free, the fax machine will start
dialing and sending the fax. If memory becomes full, the fax machine will send
the document in real time (even if
Sometimes you may want to send an important document immediately, without
waiting for memory transmission. You can set
1
Place the original face down in the ADF.
2
Press Menu/Set, 2, 2, 5.
3
To change the default setting, press
(or OFF), and then press Menu/Set.
select
ON
Go to Step 5—OR—For the next fax transmission only, press
NEXT FAX
ONLY, and then press Menu/Set.
4
For the next fax only, press
and then press Menu/Set.
5
Press 1 if you want to select additional settings. The LCD returns to the
SETUP SEND
then go to Step 6.
6
Enter fax number, and then press Black Fax Start.
If you are sending a color Fax, the fax machine will send it in real time even if
REAL TIME TX
Checking Job Status
Check which jobs are still waiting in memory to be sent. (If no jobs are waiting,
the LCD shows
6.)
1
Press Menu/Set, 2, 6.
2
If you have multiple jobs waiting, press
3
Press Stop/Exit.
7 - 5
S E T U P S E N D
REAL TIME TX
to select
or
menu—OR—Press 2 if you are finished choosing settings, and
is set to OFF.
NO JOB
WAITING.) (See
is set to OFF).
REAL TIME TX
to
or
ON
(or OFF),
Canceling a Job in Memory
to scroll through the list.
or
to ON.
or
to select
, page 7-