ABB COM600 Station Automation Series User Manual page 28

COM600 3.2
28
COM600 Station Automation Series
User's Guide
firewall pre-configured to allow communication only with web clients and remote
communication using protocols for example IEC 870-5-104 and DNP 3.0 LAN/WAN.
Table 3.5.1-1 shows the default IP addresses for the LAN ports.
Table 3.5.1-1 Default IP addresses for the LAN ports
LAN Port Gateway
LAN 1 Not defined
LAN 2 Not defined
Some tasks, for example changing the IP addresses or adding users, require access directly
to the COM600 computer either locally or via the remote desktop software.
Accessing the COM600 computer:
•
Locally by connecting a USB keyboard, a USB mouse and a display to the computer.
•
Remotely with the remote desktop program via LAN. By default the security settings
allow the remote desktop connection only via the interface reserved for the local
use.
Regional settings
The default regional setting is English (United States).
Remote desktop
You can use the COM600 computer as a local console from an engineering computer
with remote desktop.
The COM600 computer can be restarted remotely by running restart.bat command from
the root of C drive. The COM600 computer can also be shut down by running shut-
down.bat command.
If you enter the command shutdown.bat, the Gateway com-
puter shuts down and you cannot restart it remotely.
Built-in user accounts
Two user accounts are predefined in the COM600 computer:
• Username: Administrator
• Password: pwd2004
Mask IP Address
255.255.255.0 10.0.0.11
255.255.255.0 192.168.2.11
1MRS756125
Local Area Con-
nection (Remote)
Local Area Con-
nection (Local)