Configuration; About This Section; Configuration And Maintenance - ABB COM600 Station Automation Series User Manual

COM600 3.2
4.
4.1.
4.2.
32
COM600 Station Automation Series
User's Guide

Configuration

About this section

This section describes the configuration tasks common to all OPC servers, and gives an
overview of the configuration tasks related to OPC clients.
All the possible configuration scenarios are not included in
this manual. Refer to the corresponding user's guides listed
in 1.8, Related documents for more detailed instructions. You
must have configuration rights to be able to perform the tasks
described in this section.
The configuration tasks described in this section apply only
to COM610 and 615.

Configuration and maintenance

Communication Engineering Tool is used to configure and maintain the Gateway.
Communication networks are described in the Communication structure of the Project
Explorer window. The structure is built using OPC server/client, communication chan-
nel/subnetwork and device objects. These objects have communication properties that
can be accessed via the Object Properties window. The properties define for example
the communication port, bit rate, timing parameters, unit addresses and so on.
The substation structure of CET is used to configure the HMI functions of the COM600
products. The substation structure presents the functional view of the substation. It
includes substation, voltage level, bay, busbar and conducting equipment objects.
The Single line diagram is a graphical presentation of the process objects in the substation.
The Single line diagram can be edited on different levels. The bay layout can be con-
figured by opening the SLD Editor from a bay object. When the SLD Editor is opened
from a voltage level object, it is possible to assign the positions of the bays within a
voltage level. The position of the voltage levels in the complete substation single line
diagram is done by opening the SLD editor from the substation object.
Substation objects are linked to communication structure objects by using the Data
Connection tool. For example the circuit breaker object in the substation structure is
linked to the CSWI logical node in the communication structure. The link between the
structures is also used on the event list, to present the events using the names according
the substation structure.
1MRS756125