Cross-References Function - ABB COM600 Station Automation Series User Manual

1MRS756125
4.3.3.3.
COM600 Station Automation Series
User's Guide

Cross-References function

Data objects are added differently for OPC clients than for the upper level objects. Drag
and drop the data objects you need from an OPC server to the slave. Note that you also
can select an upper level (server, channel, and so on) object and drag and drop it into
the Cross-Reference window. As a result, all the data objects within the selected object
appear in the Cross-References window and can be connected to the slave OPC client.
Figure 4.3.3.3-1 Cross-References window
In the Cross-References window, you can use a filter file to leave out some of the data
objects to be connected to the Slave Device. Select the filter file to be used from the
drop-down menu under Active Filter. If there are no filter files listed in the drop-down
menu, you can create your own filter file by clicking Modify Filter File.
You can also modify an existing filter file to meet your needs. The Cross-References
table allows you to view the data objects by type. Use the tabs in the upper part of the
table to do this. Under the General tab, you can see all the data objects and their property
values. Here you can sort the data objects by clicking the column heading (Object Name,
Description, 61850-Type and so on).
There is a possibility to export the cross-references table to Microsoft Excel and to import
the table from Microsoft Excel. Clicking Apply connects the data objects to the Slave
Device. After that you can change the data object values either in the Object Properties
window or in the Cross-References window. For more detailed instructions on configuring
the data object properties in the Cross-References window, refer to the slave protocol
user's guides listed in 1.8, Related documents.
COM600 3.2
CrossRefFunc.jpg
39