Table of Contents
Advertisement
>
Open the battery compartment
>
Insert 4 x 1.5V batteries of the type "C/Baby/LR14" as per
the insertion markings shown in the battery compartment g.
>
Pay heed to the correct poling of the batteries, otherwise the
device will not function and could even be damaged.
>
Close and secure the battery compartment
>
Leaking batteries can cause damage to the radio. If you do
not intend to use the device for an extended period, remove
the batteries.
Switching the device on and off
>
To switch the device on, turn the
volume regulator i clockwise over a small resistance.
>
Press the respective button
>
FM = Very high frequency
>
MW = Medium wave
>
LW = Long wave
>
SW = Short wave
>
to select the desired
For VHF reception, extend the telescope aerial
>
length and then determine its best positioning.
>
For reception of the remaining frequency ranges, the radio is
fitted with a built-in aerial. To improve reception, if necessary
turn the radio until it is in the most favourable position.
Turn the transmitter calibration TUNING
>
desired radio station. Use the station dial for orientation.
>
Select the desired sound volume using the
regulator i.
g on the rear of the device.
o,
a,
s, or
d,
frequency range .
- 8 -
g .
On/Off switch - sound
e to receive the
sound volume
q to its full
Advertisement
Table of Contents
