Connecting A Mains Adapter; First Use; Switching The Device On And Off; Setting The Time - Silvercrest SWED 100 A1 User Manual And Service Information

SilverCrest SWED 100 A1
If the display (5) indicates a low battery power (30), the batteries are
almost empty. Replace them with new batteries of the same type.

Connecting a mains adapter

Remove the batteries from the battery compartment (21) at the back of the
device if you have previously inserted them. Insert the plug of the mains
adapter into the jack (19) of the world receiver (A). Then insert the mains
adapter into an easily accessible mains socket.

First use

Switching the device on and off

To switch on the device, press the "POWER" button (6) once briefly. When
it is switched on, the display (5) shows the tuned frequency and the
frequency band:
To switch off the device, press the POWER button (6) again. When it is
switched off, the display (5) shows the time that is currently set.

Setting the time

You can set the time only when the device is switched off. Switch off the
device with the POWER button (6) if it is switched on.
18 - English
Remove the batteries if you will not be using the device
for an extended period of time.
FM
MW
SW
FM band
medium wave band
shortwave band