First Use; Switching The Device On And Off; Setting The Time - Silvercrest SWED 250 A1 User Manual And Service Information

SilverCrest SWED 250 A1

First use

Switching the device on and off

To switch on the device, press the POWER ON/OFF button [10] once
briefly. When it is switched on, the device shows the tuned frequency and
the frequency band (FM, MW, SW) on the display [8].
To switch off the device, press the POWER ON/OFF button [10] again.
When it is switched off, the display [8] shows the time that is currently set.

Setting the time

You can set the time only when the device is switched off. Switch off the
device with the POWER ON/OFF button [10] if it is switched on.
18 - English
When you press a button, please note that the backlight
of the display is always switched on first before the
device performs the function (except for switching on and
off). This function is useful in the dark, for example, for
reading the time on the display without inadvertently
using another function.
You can use the 12/24 button [17] to switch between
the 12-hour and 24-hour display. For the 12-hour
display, the symbol "PM" [35] is indicated on the display
once it is past noon.