Silvercrest KH2150 Operating Instructions Manual page 18

CODE-SETUP overview
7. Confirm the selection with the
WAIT... then the first entry of the manufacturer list, such
as ADMIRAL 0000, appears in the LCD display (2).
8. Press the up or down arrow button (6). The next manu-
facturer with device code appears in the LCD display (2).
9. Press various buttons on the remote control to test the
functions. If your device responds, you have selected the
correct device code. Continue with step 12.
10. Press the left or right arrow button (6). The next device
code of the same manufacturer appears in the LCD
display (2).
11. Repeat step 9.
OK
12. Press the
PLEASE WAIT... then SUCCESS appears in the
LCD display (2).
Repeat steps 1 to 12 for all devices that you would like to
control with the remote control.
button (7). The device code is saved. First
16
OK
button (7). First PLEASE