Mode Clear; All Learn Clear - Silvercrest KH2150 Operating Instructions Manual

Note:
If "LEARN ERROR" appears in the LCD display (2), repeat the
learning function process starting from step 5.
7. Hold the button on the original remote control pressed
until first SUCCESS then LEARN MORE? appears in the
LCD display (2).
Note:
To end the learning function, press the
8. Press the right arrow button (6) to learn more buttons.
LEARN MORE? appears in the LCD display (2).
Repeat steps 5 to 7 to learn more buttons.

MODE CLEAR

Clearing the learned buttons of a device.
S
1. Hold the
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until LEARN-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). MODE LEARN appears
on the LCD display (2).
4. Press the down arrow button (6) repeatedly until MODE
CLEAR appears in the LCD display (2).
5. Press the right arrow button (6). MODE KEY? appears in
the LCD display (2).
6. Press the desired device button (4). CONFIRM CLEAR
appears in the LCD display (2).
7. Press the right arrow button (6). First PLEASE WAIT... then
SUCCESS appears in the LCD display (2).

ALL LEARN CLEAR

Clearing the learned buttons of all devices.
S
1. Hold the
in the LCD display (2).
2. Press the down arrow button (6) repeatedly until LEARN-
SETUP appears in the LCD display (2).
3. Press the right arrow button (6). MODE LEARN appears
in the LCD display (2).
4. Press the down arrow button (6) repeatedly until ALL
LEARN CLEAR appears in the LCD display (2).
5. Press the right arrow button (6). CONFIRM CLEAR appears
in the LCD display (2).
6. Press the right arrow button (6). First PLEASE WAIT... then
SUCCESS appears in the LCD display (2).
Then the standard display appears.
button (5) pressed until CODE-SETUP appears
button (5) pressed until CODE-SETUP appears
EXIT
button (8).
26