3-5 Mounting a Lens
1
Push up the lens fixing lever and remove the lens
mount cap from the lens mount.
2
Align the center pin on the end of the lens barrel
with the center slot in the lens mount and insert the
lens into the lens mount.
3
While supporting the lens, push down the lens
fixing lever to fix the lens.
4
Plug the lens cable into the LENS connector.
5
Fasten the cable with the cable clamps.
Use the procedure described below to mount a lens (not supplied) on the
video camera.
Handle the lens with care, referring to the manual supplied with it.
5
4
Letter Ver.3.0
2
1,3
Chapter 3 Setting Up the Video Camera
3-9
3-810-005-11(1)