Execution Timing; Specified Time (Hour, Minute, Day Of Week); Time Setting - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Time Setting

Set the time setting function (SNTP client).
Item
Time Setting (SNTP Client)
SNTP Server IP Address
Timer Setting After Power-on and Reset

Execution
Timing
Time Intervals
Specified Time (Hour,
Minute, Day of Week)
The SNTP server must be only one in a network. The time to be output is the same even though multiple
modules in the same system retrieve time from the same SNTP server.

Execution Timing

■Specified Time (Hour, Minute, Day of Week)

Set an execution time value within the following range in "Clock Time (Hour, Minute)".
Item
Hour
Minute
To specify the day of the week when time setting is executed, set "Not Set" in the day when time setting is not executed under
"Day of Week". (Time setting is set to be executed every day (all the days are set to "Set") by default.)
When specifying the day of the week, set at least one day of the week to "Set". An error occurs when all the days are set to
"Not Set".
Description
Select whether to use the time setting function (SNTP client).
Set the IP address of the SNTP server.
Select whether to execute the time setting function upon power-on or
reset.
Select the execution timing of the time setting.
When "Fixed Scan Interval" is selected, set the time interval (minute) of
time setting executions.
When "Fixed Time" is selected, set the day of the week and the clock
time (hour and minute) when the time setting function is executed.
( Page 259 Specified Time (Hour, Minute, Day of Week))
Setting range
0 to 23
(Default: 12)
0 to 59
(Default: 0)
Setting range
• Not Use
• Use
(Default: Not Use)
0.0.0.1 to 223.255.255.254
(Default: 0.0.0.1)
• Disable
• Enable
(Default: Disable)
• Fixed Time
• Fixed Scan Interval
(Default: Fixed Time)
1 to 1440
(Default: 1 Minute)

2 PARAMETER SETTINGS
2.3 Application Settings
2
259