Example Of Predefined Protocol Communications; Parameter Settings; Sending Side - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Example of predefined protocol communications

This section describes an example of predefined protocol communications using UDP/IP.
System configuration
GX Works3

Parameter settings

Connect the engineering tool to the CPU module and set the parameters.

■Sending side

1.
Set the CPU module as follows.
[Project]  [New]
2.
Click the [OK] button to add the module labels of the CPU module.
1 FUNCTIONS
50
1.3 Communications Using the Predefined Protocol
Sending side
(192.0.1.100)
Ethernet
Receiving side
(192.0.1.101)