Hitachi Universal Storage Platform V Configuration Manual page 19

Table 1-2
Device Category
(see
Type
(Note 1) Note 2)
OPEN- SCSI HITACHI
V*n VLL disk
OPEN- SCSI HITACHI
E*n VLL disk
3390-3A FXotm/ HITACHI
mto
3390-3B FXmto HITACHI
3390-3C FXotm HITACHI
FX FXoto HITACHI
OPEN-3
3390-3A FXotm/ HITACHI
VLL mto
3390-3B FXmto HITACHI
VLL
3390-3C FXotm HITACHI
VLL
FX FXoto HITACHI
OPEN-3
VLL
Note 1: The availability of a specific USP V device type depends on the level of
microcode installed on the USP V system.
Note 2: The category of a device (SCSI disk or FX) determines its volume
usage.
devices. The SCSI disk devices (OPEN-x, VLL, LUSE, VLL LUSE) are usually
formatted with file systems for SGI IRIX operations. The FX devices (3390-
3A/B/C, OPEN-x-FXoto) must be installed as raw devices and can only
accessed using FX. Do not create a partition or file system on any device used
for FX operations.
Hitachi Universal Storage Platform V/VM Configuration Guide for SGI
USP V Device Specifications (continued)
Vendor Product
Name Name
(512-byte
OPEN- Note 4
V*n-CVS
OPEN- Note 4
E*n-CVS
3390-3A 5820300
3390-3B 5816820
OP-C- 5820300
3390-3C
OPEN-3 4806720
3390- Note 4
3A-CVS
3390- Note 4
3B-CVS
3390- Note 4
3C-CVS
OPEN-3- Note 4
CVS
Table 1-3 shows the volume usage for SCSI disk devices and FX
# of Sector
Blocks Size
(bytes)
blk)
512 Note 5
512 Note 5
512 3345
512 3343
512 3345
512 3338
512 Note 5
512 Note 5
512 Note 5
512 Note 5
Introduction
# of Data # of
Cylinders Heads
per Track
15 128
15 96
15 116
15 116
15 116
15 96
15 116
15 116
15 116
15 96
® ®
IRIX Host Attachment
# of Capacity
Sectors MB
(Note 3)
Note 6
Note 6
2844
2842
2844
2347
Note 6
Note 6
Note 6
Note 6
1-7