Creating The Mount Directories And Mounting The Devices; Verifying The File Systems - Hitachi Universal Storage Platform V Configuration Manual

Creating the Mount Directories and Mounting the Devices

After you have created the file systems for the new USP V SCSI disk devices,
you can create the mount directories and mount the new devices. Make sure
to choose a unique directory name which identifies the logical volume.
To create the mount directories and mount the new SCSI disk devices:
1. Create the desired new mount directories using the mkdir command. For
example, to create a mount directory for logical unit 0 on the USP V, enter:
mkdir /USP_LU00
2. Mount all new USP V devices using the mount command. For example, to
mount partition 0 of LUN 15, drive (TID) 0, controller 8, enter:
mount /dev/dsk/dks8d0l15s0 /USP_LU00

Verifying the File Systems

Verify the file systems for the new USP V disk devices using the df command
(see Figure
correct.
# df -k
File system
/dev/root
/dev/dsk/dks8d0l15s0
:
:
#
Figure 3-6
3-10
Hitachi Universal Storage Platform V/VM Configuration Guide for SGI
3-6). Make sure that the capacity value (kB) for each device is
← List file systems.
Type Kbytes
xfs 969857 414702
xfs 1048576
Verifying the New File Systems
Configuring the New Disk Devices
use avail %use Mounted on
555155 43% /
13 1048563 0% /USP_LU0
®
IRIX
New device.
®
Host Attachment