Toro 1800 Power Curve Set-Up/Assembly page 2

1800 POWER CURVE
4. Squeeze the upper tubes together and wiggle the
upper tubes down until the mounting holes in the
upper and lower tubing line up:
Left hand (Fig. 005):
Right hand (Fig. 006):
2
Fig. 005 PICT-1437
Fig. 006 PICT-1438
5. Place the mounting plate over the tubes and align
the mounting plate holes with the upper and lower
tubing holes (Fig. 007).
6. Insert the end of the chute crank rod through the
hole in the shroud (Fig. 008).
Fig. 007 PICT-1441
Fig. 008 PICT-1443
Service Instruction TSN0001a