Toro 1800 Power Curve Set-Up/Assembly page 6

1800 POWER CURVE
Discharge Chute Installation
1. Partially insert a carriage bolt through the lower
chute (Fig. 019).
2. Insert a rubber washer onto the carriage bolt (Fig.
020).
6
Fig. 019 PICT-1471
Fig. 020 PICT-1474
3. Position the deflector chute onto the lower chute and
align the mounting holes (Fig. 021).
4. Insert a metal flat washer onto the carriage bolt (Fig.
022).
Fig. 021 PICT-1476
Fig. 022 PICT-1478
Service Instruction TSN0001a