Advertisement
Attaching the left strain gauge unit
1
Attach the left strain gauge unit along the left strain gauge unit guide straight.
2
Remove the left sensor guide and the left strain gauge unit guide from the left crank.
3
After pressing on the two-sided tape part on the edges of the strain gauge unit, use your finger to
smooth it out three times to evenly spread the adhesive of the strain gauge unit.
Bonding with the pressure bonding tool
1
Insert the right and left crank into the pressure bonding tool that you prepared according to "Setting Up
the Pressure Bonding Tool" (page
Left side
Right side
).
20
Advertisement
