Table of Contents
Advertisement
RRU3268
Installation Guide
Issue ()
Figure 9-16 Installing an RRU AISG multi-wire cable
3.
Use an M3 Phillips screwdriver to tighten the posts on both sides of the waterproof
DB9 connector to 0.4 N·m (3.54 lbf·in.).
4.
Connect the other end of the AISG extension cable to the standard AISG male
connector on the RCU, as shown in
Figure 9-17 Installing an RRU AISG extension cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
9-17.
9 Installing RRU Cables
105
Hide quick links:
Advertisement
Table of Contents
