Safety Instructions And Further Information; General Safety Instructions - Siemens SIMATIC IFP2200 INOX MT ETH Compact Operating Instructions

Safety instructions and further information

The general safety instructions in the "Industrial Flat Panel IFP1500, IFP1900, IFP2200,
IFP1900 PRO, IFP1900 ETH, IFP2200 ETH" operating instructions apply to all devices with
a capacitive multi-touch screen and Ethernet monitors.
2.1

General safety instructions

Installation according to the instructions
The device may only be used in machines which comply with the Machinery Directive
The "Machinery Directive" governs, among other things, the precautions to be taken when
commissioning and operating machines within the European Economic Area.
Failure to follow these precautions is a breach of the Machinery Directive. Such failure may
also cause personal injury and damage depending on the machine operated.
The machine in which the HMI device is to be operated must conform to Directive
2006/42/EC.
Hazardous areas
When operating the HMI device in hazardous areas the following warning applies.
Explosion Hazard
Do not disconnect while circuit is live unless area is known to be non-hazardous.
Substitution of components may impair suitability for Class I, Division 2 or Zone 2.
Risque d'Explosion
Ne pas déconnecter pendant que le circuit est sous tension, sauf si la zone est non-
dangereuse. Le remplacement de composants peut compromettre leur capacité à satisfaire
à la Classe I, Division 2 ou Zone 2.
10
WARNING
WARNING
Compact Operating Instructions, 03/2018, A5E42185570-AA
2
IFP2200 INOX MT ETH