Siemens SIMATIC IFP2200 INOX MT ETH Compact Operating Instructions page 20

Installing and connecting the device
3.3 Mounting the device
Note additional product information included in the scope of delivery, if available.
Note
Use a tightening torque of 1.3 Nm when tightening the mounting clips with the torque
wrench, because the promised degree of protection cannot be guaranteed otherwise. The
sealing concept includes a defined seal compression with mechanical end stop.
Installation
Risk of injury from falling device
An unsecured device can fall down. This may result in injuries and damages to machines
and the device.
Protect the device from falling down throughout the entire assembly process.
Similar to figure
20
CAUTION
Compact Operating Instructions, 03/2018, A5E42185570-AA
IFP2200 INOX MT ETH