6.11.5 Motor connector
Make sure that the motor connector is assembled
correctly.
6.12.1 Troubleshooting diagram for the electrical system
Product will not start
Check the battery
Can the product be started
– green light?
Check the fuse
Check the cables
Check the safety switch
Check the breaker
Check the electric motor
737 - 002 - 25.10.2018
6.11.6 Cable
Make sure that the cable is assembled correctly.
6.12 Troubleshooting of the electrical
system
Is the keypad showing a
fault signal?
Let the machine cool
down for at least 60 mins.
Change the control unit if
the fault persists.
Replace the part
Replace the control unit
Troubleshooting - 45