Lenovo 46M4002 Installation And Maintenance Manual page 21

2 1
2 0
1 9
To install the PDU in the 1U mounting space in the side of an Enterprise rack cabinet, complete the following
steps:
1. Align the vertical-mounting brackets to the front of the PDU. Be sure to attach the brackets so that the
power outlets face the rear of the rack cabinet.
2. Attach the brackets to the PDU with two M3 x 5 screws per bracket. Use the screws that come with the
PDU.
3. Align the PDU with the opening in the side of the rack cabinet; then, while you hold the PDU in place,
attach the brackets to the rack-mounting flanges with four clip nuts and four M6 screws that come with
the PDU.
Short mounting bracket
.
Chapter 2 Installing the 1U PDU vertically in a rack cabinet
13