Configuration - ABB NE870 User Manual

Section 3 Interface Modules
For advanced network settings and more diagnostic information, please use the
CLI.
Detailed documentation is available in the chapter The Command Line
Management Tool in the NEOS User Manual.
Factory default:
Consult your network administrator to know more on subnet.

Configuration

Configure the unit via web browser. The unit can easily be configured through
a web browser. Open the link
will be prompted with a login screen, where the default settings for username and
password are:
Once you have logged in, you can use the extensive integrated help function
describing all configuration options. Two common task when configuring a new
switch is to assign appropriate IP settings, and to change the password of the admin
account.
The password can be up to 64 characters long, and should consist of printable
ASCII characters (ASCII 33-126); Space is not a valid password character.
For additional configuration information, refer to System 800xA Network
Configuration (3BSE034463) manual.
3BSE083159
– IP address: 172.16.5.245
– Netmask: 255.255.252.0
– Gateway: Disabled
– Username: admin
– Password: CS4dmin
http://172.16.5.245 in your web browser, and you
27