Brother ScanNCut DX Stamp Starter Kit Operation Manual

Stamp Starter Kit
EN
About Stamp Starter Kit
You can cut the stamp sheet with your cutting machine to create original stamps.
Precautions
Do not fold or bend the stamp sheet.
●
For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.
●
Do not store stamp sheets or acrylic blocks in an environment exposed to direct sunlight or extremely low or extremely high
●
temperatures.
The contents of this document are subject to change without notice.
●
The screens in this manual are for illustration purposes only and may differ from the actual screens.
●
Accessories
After purchasing this kit, check the contents.
A
*1
A
Stamp sheet 5.9" × 7.8" (150 mm × 200 mm) : 3 pieces
B Acrylic block 2.9" × 3.9" (75 mm × 100 mm)
C Activation card for access to 50 stamp patterns
D Insertion
*1 This accessory is consumable. After you have used it all, purchase CASTPS1(stamp sheets). To purchase options, contact the retailer
where this kit was purchased.
1
B C D
Name
Version 0