Standards, Certificates And Approvals - Siemens SIMATIC HMI Operating Instructions Manual

2.2

Standards, certificates and approvals

Certifications
The following overview shows possible approvals.
The respective valid approvals for the HMI device itself, the charging station, power supply
unit and transponder are those shown on the rear panel.
CE approval
The HMI device, charging station, power supply unit, and transponder satisfy the
requirements and protection objectives of the EC Directives below. The HMI device,
charging station, power supply unit, and transponder comply with the harmonized European
standards (EN) published in the Official Journals of the European Union for programmable
controllers:
● 89/336/EEC Electromagnetic Compatibility Directive (EMC Directive)
● 98/37/EG Directive of the European Parliament and Council of 22 June 1998 on the
● Specific absorption rate in accordance with EN 50932
EC Declaration of Conformity
The EC Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens Aktiengesellschaft
Automation & Drives
A&D AS RD ST PLC
PO Box 1963
D-92209 Amberg, Germany
UL approval
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
CAUTION
approximation of the laws and administrative regulations of the Member States
concerning machinery
Safety instructions, standards and notes
2.2 Standards, certificates and approvals
37